Cylinder shock

Here is a simple circuit, with which you can entertain family and friends, to make the meetings more enjoyable. The cylinder shock, it is literally a cylinder that gives you an electric shock, not dangerous, when shots with two hands.

OPERATION: The pulses are generated by a simple oscillator hartley with a single transistor, pulsations that are coupled to a processor that raises the inverted voltage of 1 or 2 small batteries. R1 and C1 are responsible for determining the frequency of oscillations, if you change any of these components or voltage, the frequency will be changed. The sensations are different with each frequency.

Any time you have armed the circuit and move everything inside the plastic tube, filling the spaces fixes everything with some kind of flammable or non-conductive material. The S1 is placed at the side of the plastic tube.

List of components:
capacitors :
C1: 160 µF. 10 V. (electrolytic)
Q1: 2N2222 (NTE 123A)
Resistors:
R1: 1.8K Ω 1/2 W.
Other:
S1: pushbutton
T1: Transformer with primary and secondary for 115 volts to 100 volts for 6 or 200mA.
B1: 1 or 2 batteries of 1.5 volts
1 plastic tube of 2 inches in diameter and 10 inches long.
Contacts: Strips of aluminum in the form of caps that fit the plastic tube

pcb expensive components print